Performance and characteristics
1. There are 3 kinds of feeding methods: feeding, post feeding and lower feeding. For the characteristics of chemical materials, there are single drum and double drum.
2, the trough insulation has steam insulation, heat transfer oil circulation insulation, electric heating and insulation.
3, the equipment is divided into open and semi-closed, fully enclosed, vacuum-type, nitrogen-protected.
4, the blade material is, brass, phosphor bronze, nylon, bakelite, alloy steel saw blade.
5, the discharge system has a single out, double out and so on.
6, special requirements: the regular shape and size of the material, can ensure the thickness and size uniformity of the material.
7. The cooling or (heating) system is divided into jacket type or spray type. It is designed according to the size and specifications of the slicer and the characteristics of the material, which can improve the heat exchange efficiency and increase the drum strength, and increase the relative product output.
8. The cooling water adopts packing seal or rotary joint, which can reliably prevent water leakage, and applies a new process to reduce the consumption of cooling water.
9. There are heat insulation layer and side scraper at both ends of the drum. The two ends of the drum do not feed, so there is no frictional power consumption at both ends of the drum, which eliminates the problem of unstable start due to the end face.

Specification model

Drum specifications Mm	Motor power KW	Slice speed r/min Frequency control	Reference dimension mm
			L	W	H
500×500	2.2	2-12	1500	600	1000
600×600	2.2	2-12	1600	700	1200
700×700	2.2-3	2-12	1700	800	1400
800×800	3-4	2-12	1800	900	1450
900×900	3-4	2-12	2000	1000	1550
1000×1000	4-5.5	2-12	2200	1100	1700
1200×1200	4-5.5	2-12	2400	1300	1900
1200×1500	5.5-7.5	2-12	2800	1300	1900
1500×1500	5.5-7.5	2-12	2800	1600	2100
1500×1800	7.5-11	2-12	3100	1600	2100
1500×2000	7.5-11	2-12	3300	1600